PPA 9G22135 H 4Plas

Properties:

Filler reinforcement material glass fiber reinforcement material 35% filler additive by weight thermal stabilizer characteristics thermal stability

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	9.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	1.6mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2/5	14000	MPa
tensile strength	Break, 23°C	ISO 527-2/5	200.0	MPa
Tensile strain	Break, 23°C	ISO 527-2/5	2.0	%
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	9	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
Tensile modulus	23°C	ISO 527-2/5	14000	MPa
tensile strength	Break,23°C	ISO 527-2/5	200	MPa
Tensile strain	Break,23°C	ISO 527-2/5	2.0	%
Heat distortion temperature	Test Condition	Test Method	Test Result	Test Unit
Electrical Properties	表面电阻率	IEC 60093	1E+13	ohms
Hot deformation temperature	体积电阻率	IEC 60093	1E+15	ohms·cm
Hot deformation temperature	Hot deformation temperature	漏电起痕指数	IEC 60112	550	V
flammability	UL 阻燃等级，0.750 mm	UL 94	HB
flammability	flammability	1.60 mm	UL 94	HB
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	280	°C
	Hot deformation temperature	Melting Temperature	ISO 11357	315	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	280	°C
Melting temperature		ISO 11357	315	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.47	g/cm³
Shrinkage rate	TD		1.0	%
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.6	%
Shrinkage rate	TD		1.0	%
Shrinkage rate	Shrinkage rate	MD		0.20	%
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	1.6	%
density		ISO 1183	1.47	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Compared to the anti leakage trace index		IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top