PA66 1300G W3301 ZHUHAI TOYOCOLOR

Form：Granules

Properties:

High rigidityhigh strengthFatigue resistanceAnti creepRapid crystallizationLow warpageLow deformability

Typical Applications:

Electrical fieldElectronic fieldEngine hood partsAutomotive sectorcomponent

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Engine hood parts \| Automotive sector \| component
Properties:	High rigidity \| high strength \| Fatigue resistance \| Anti creep \| Rapid crystallization \| Low warpage \| Low deformability

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index	干	ASTM D-2863	26	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	湿		2.2	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	干(湿)	ASTM D-790	128(59)	Mpa
Impact strength of cantilever beam gap	干(湿)	ASTM D-256	39(108)	J/m
flexural coefficient	干(湿)	ASTM D-790	3.0(1.3)	GPa
tensile strength	干(湿)	ASTM D-638	88(67)	Mpa
Elongation at Break	干(湿)	ASTM D-638	35(200)	%
Rockwell hardness	干(湿)	ASTM D-785	85(60)	M Scale
Rockwell hardness	Rockwell hardness	干(湿)	ASTM D-785	120(110)	R scale
thermal performance	Test Condition	Test Method	Test Result	Test Unit
specific heat	干		1670	J/(kg.k)
Hot deformation temperature	1.82MPa,干	ASTM D-648	75	°C
Hot deformation temperature	Hot deformation temperature	0.46MPa,干	ASTM D-648	240	°C
Linear coefficient of thermal expansion	干	ASTM D-696	8
thermal conductivity	干		0.2	W/(m.K)
UL flame retardant rating	干	UL 94	V-2
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	干	旭化成方法	0.9-1.6	%
Wear factor	湿	ASTM D-1044	6

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top