HDPE 60301UD
0
- Properties:Injection moldinghigh flow
- Usages:Used for fish boxesJibanand industrial components
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 3.5 g/10min | ||
| density | 0.960 g/cm3 | ||
| Water absorption rate | 0.03 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Elastic modulus | 1250 MPa | ||
| tensile strength | 64 MPa | ||
| Impact strength of cantilever beam gap | 14 KJ/m2 | ||
| Shore hardness | 68 D | ||
| tensile strength | 32 MPa | ||
| elongation | Break | 1400 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | 2.3 106Hz |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | 134 ℃ | ||
| vicat | 127 ℃ | ||
| thermal conductivity | 0.48 W/m℃ | ||
| Linear coefficient of thermal expansion | 2×10-4 m/m℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top