PC IUPILON™ 7022IRF MITSUBISHI ENGINEERING JAPAN

544

Properties:
Low viscosity
Easy to demould
Certificates:
FDA
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Water absorption rate	23℃，24时间	ASTM D-570	0.15	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
tensile elongation	23℃	ASTM D-638	110	%
Bending modulus	23℃	ASTM D-790	2.3	GPa
tensile strength	23℃	ASTM D-638	60.8	Mpa
Impact strength of cantilever beam gap	3.2mm	ASTM D-256	880	J/m
Rockwell hardness		ASTM D-785	R120
bending strength	23℃	ASTM D-790	88.2	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Flame retardant grade	1.6mm	UL 94	V-2
Load deflection temperature	0.455KPa	ASTM D-648	145	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric loss factor	106Hz	ASTM D-150	0.0092
Surface resistivity		ASTM D-257	>1015	Ohm
Volume resistivity		ASTM D-257	4-016	ohm-cm
Dielectric constant	106Hz	ASTM D-150	25.2	Pf/m
Dielectric strength		ASTM D-149	16	MV/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top