PC LEXAN™ 500R-834
28
- Properties:enhanceGlass fiber reinforcedGlass fiber reinforced b
- Usages:Fiber grade
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Loss factor | ASTM D-150 | 0.0008 | |
| density | ASTM D-792 | 1.25 | |
| Mold shrinkage rate | ASTM D-955 | 2-4 10 | |
| Flame retardancy | UL 94 | 5V | |
| UL 94 | 3.0 mm | ||
| UL 94 | V-0 | ||
| UL 94 | 1.5 mm | ||
| enhance | 10 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.12 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D-790 | 3445 Mpa | |
| Notch impact strength | ASTM D-256 | 107 J/m | |
| tensile strength | ASTM D-638 | 66 Mpa | |
| Rockwell hardness | ASTM D-785 | 124 | |
| elongation | ASTM D-638 | 15 % | |
| bending strength | ASTM D-790 | 103 Mpa | |
| tensile strength | ASTM D-638 | 55 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1.0×10 Ω.cm | |
| dielectric constant | ASTM D-150 | 3.05 | |
| Loss factor | ASTM D-150 | 0.0075 | |
| dielectric constant | ASTM D-150 | 3.1 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-648 | 146 °C | ||
| vicat | ASTM D-1525 | 154 °C | |
| linear expansion coefficient | ASTM E-831 | 3.2×10 1/°C | |
| ASTM D-648 | 142 °C | ||
| UL long-term use temperature | UL 746B | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top