HIPS SEHI-102 IDEMITSU MALASIA

0
  • Properties:
    Characteristics
    high impact resistance
    high heat resistance
    flame retardant form
    particles
  • Usages:
    Shell

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7921.15 g/cm³
melt mass-flow rateASTM D123810 g/10 min
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 945V
squeeze outTest ConditionTest MethodTest Result
drying temperature70.0 °C
drying time1.0 to 2.0 hr
Barrel Temperature160 to 200 °C
Barrel Temperature180 to 220 °C
Barrel Temperature200 to 240 °C
Barrel Temperature200 to 240 °C
die temperature190 to 220 °C
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength BreakASTM D63823.5 MPa
elongationBreakASTM D63850 %
injectionTest ConditionTest MethodTest Result
Temperature at the rear of the barrel180 to 210 °C
drying temperature70.0 °C
drying time1.0 to 2.0 hr
Temperature at the front of the material cylinder210 to 240 °C
Spray nozzle temperature200 to 230 °C
Temperature40.0 to 60.0 °C
Temperature in the middle of the barrel190 to 220 °C
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureASTM D64879.0 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top