Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| STORAGE STABILITY | | ASTMD2471 | 6.0 min |
| Thermosetting mixed viscosity | | ASTMD2393 | 600 cP |
| stripping time | | | 60 min |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD1475 | 1.12 g/cm³ |
| Specific volume | | ASTMD1475 | 0.892 cm³/g |
| Shrinkage rate | | ASTMD2566 | 0.42 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 75 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Mixing Ratio | | | 75A:100Bbyweight |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 869 MPa |
| tensile strength | Break | ASTMD638 | 18.8 MPa |
| elongation | Break | ASTMD638 | 20 % |
| Flexural modulus | | ASTMD790 | 1170 MPa |
| bending strength | | ASTMD790 | 38.7 MPa |
| Compression Modulus | | ASTMD695 | 414 MPa |
| compressive strength | | ASTMD695 | 37.6 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 47.2 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare