EVA 5-2 BEIJING EASTERN

Form：Granules | Grade：Thin film grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	2	g/10
density		ASTM D-1505	0.925
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D-638	8.2	N/mm
	tensile strength	Yield	ASTM D-638	7.5	N/mm
		tensile strength	Break	ASTM D-638	27	N/mm
		tensile strength	tensile strength	Break	ASTM D-638	19	N/mm
Secant modulus	1%Strain, Break	ASTM D-882B	124	N/mm
Secant modulus	Secant modulus	1%Strain, Break	ASTM D-882B	130	N/mm
Shore hardness		ASTM D-2240	95
Shore hardness	Shore hardness		ASTM D-2240	40
tear strength		ASTM D-1922	239	g
tear strength	tear strength		ASTM D-1922	167	g
Impact strength of cantilever beam gap		ASTM D-1709 A-B	大于等于140	g
Elongation at Break		ASTM D-6398	340	%
	Elongation at Break		ASTM D-6398	620	%
		Elongation at Break		ASTM D638/ISO 527	340	%
		Elongation at Break	Elongation at Break		ASTM D638/ISO 527	27	%
Shore hardness		ASTM D2240/ISO 868	95	Shore A
Shore hardness	Shore hardness		ASTM D2240/ISO 868	40	Shore D
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature			104	°C
Vicat softening temperature		ASTM D-1525	90	°C
Melting temperature			104	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
gloss		ASTM D-1003A	70	%
Vinyl acetate content		ISC.DIS 8965/1989(E)	5	%
turbidity		ASTM D-2457	5	%
film thickness			40	u
Vinyl acetate content			5	%
density		ASTM D1505	0.925	g/cm²
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D-149	750	KV/cm
Dielectric constant		ASTM D-150	2.6
	Dielectric constant		ASTM D150/IEC 60250	2.6
	Dielectric constant	Dielectric constant		ASTM D150/IEC 60250	750

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top