Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | | 0.20to0.40 % |
| Water absorption rate | | ISO62 | 0.060 % |
| density | | ISO1183 | 1.17 g/cm³ |
| Melt volume flow rate | | ISO1133 | 6.00 cm³/10min |
| Shrinkage rate | | | 0.30to0.50 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | 5VA |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 4500 MPa |
| Tensile stress | | ISO527-2 | 83.0 MPa |
| Tensile strain | | ISO527-2 | 2.5 % |
| Flexural modulus | | ISO178 | 4300 MPa |
| Bending stress | | ISO178 | 140 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179 | 7.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 2E+15 ohms |
| Volume resistivity | | IEC60093 | 3E+16 ohms·cm |
| CTI | | IEC60112 | 200 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO11359-2 | 4.5E-05 cm/cm/°C |
| | ISO11359-2 | 7.5E-05 cm/cm/°C |
| | ISO75-2/B | 127 °C |
| | ISO75-2/A | 120 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare