PEEK LUVOCOM® 1105-8000 LEHVOSS Group

Properties:

Filler carbon fiber reinforced material

Typical Applications:

Applications in the automotive field bearings textile applications gears pump components engineering parts medical nursing supplies bushings aerospace applications

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Applications in the automotive field \| bearings \| textile applications \| gears \| pump components \| engineering parts \| medical \| nursing supplies \| bushings \| aerospace applications
Properties:	Filler \| carbon fiber reinforced material

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	35	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	15000	MPa
tensile strength	Break	ISO 527-2	170	MPa
Tensile strain	Yield	ISO 527-2	1.5	%
Bending modulus		ISO 178	13000	MPa
bending strength		ISO 178	235	MPa
Bending strain		ISO 178	2.0	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	260	°C
Continuous use temperature		UL 746B	250	°C
Maximum operating temperature	ShortTerm		280	°C
Vicat softening temperature		ISO 306/A	295	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.56	g/cm³
melt mass-flow rate	380°C/10.0kg	ISO 1133	20	g/10min
Shrinkage rate		DIN 16901	0.30to0.60	%
Water absorption rate	23°C,24hr		<0.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	>1.0E+9	ohms
insulation resistance		IEC 60167	>1.0E+9	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top