HDPE LH606-13
0
- Usages:Used for manufacturing plastic box injection molding
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 6.0 g/10min | |
| density | ASTM D-1505 | 0.962 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength at fracture point | ASTM D-638 | 220 kg/cm | |
| impact strength | ASTM D-256 | 7.0 kg-cm/cm | |
| torsionally rigid | ASTM D-1043 | 12500 kg/cm | |
| flexural rigidity | ASTM D-747 | 9900 kg/cm | |
| Tensile strength at the point of surrender | ASTM D-638 | 320 kg/cm | |
| Elastic coefficient | ASTM D-638 | 10000 kg/cm | |
| ASTM D-2240 | 69 | ||
| elongation | ASTM D-638 | 620 ％ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | ASTM D-2117 | 131 ℃ | |
| Wei's softening temperature | ASTM D-1525 | 127 ℃ | |
| Low temperature brittle fracture temperature | ASTM D-746 | ＜-76 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top