
HIPS PH-88E TAIWAN CHIMEI
192
Form:Granules | Grade:Impact resistant grade
Properties:
Flame retardantHigh mobilityHigh glossheat-resistingHigh impact resistance
Typical Applications:
Electric wireCableShellHome appliance componentsElectrical fieldElectronic fieldProducts suitable for flame retardant use
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electric wire | Cable | Shell | Home appliance components | Electrical field | Electronic field | Products suitable for flame retardant use |
| Properties: | Flame retardant | High mobility | High gloss | heat-resisting | High impact resistance |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 6.5 | g/10min | |
| ASTM D-1238 | 19.5 | g/10min | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 6.35mm | ASTM D-256 | 7.0 | KJ/m |
| 3.18mm | ASTM D-256 | 8.5 | KJ/m | |
| Rockwell hardness | ASTM D-785 | 70 | L | |
| bending strength | ASTM D-790 | 40 | Mpa | |
| Bending modulus | ASTM D-790 | 1.8 | Mpa | |
| elongation | ASTM D-638 | 30 | % | |
| tensile strength | ASTM D-638 | 24 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D-1525 | 96 | °C | |
| UL flame retardant rating | ASTM UL-94 | V-0 | ||
| Hot deformation temperature | HDT | ASTM D-648 | 79 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D-792 | 1.15 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.