ABS Retelan® SS 30.509 GRIGIO SO.F.TER ITALY

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23°C	ASTM D638	38	MPa
Elongation at Break	23°C	ASTM D638	10	%
Tensile modulus	23°C	ASTM D638	1905	MPa
bending strength	23°C	ASTM D790	56	MPa
Bending modulus	23°C	ASTM D790	1800	MPa
Impact strength of cantilever beam gap	23°C	ASTM D256	411	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPaUnannealed	ASTM D648	96	°C
Vicat softening temperature		ASTM1525	103	°C
Vicat softening temperature	Vicat softening temperature		ASTM1525	90	°C
Linear coefficient of thermal expansion	MD	ASTM D696	5E-05	cm/cm／°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.03	g/cm³
Shrinkage rate	MD	ASTM D995	0.50	%
Water absorption rate	23°C,24hr	ASTM D570	0.30	%
melt mass-flow rate	220℃/10Kg	ASTM D1238	6.0	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	1E+13	Ω.cm
Surface resistivity		ASTM D257	1E+15	Ω.cm
Dielectric strength	1.6mm	ASTM D149	760	KV/mm
Dielectric constant	23°C	ASTM D150	3.10	1kHz
Dissipation factor	23°C	ASTM D150	4E-03	1kHz
flame retardancy	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	HB	0.80mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top