PA6 YH-900 SINOPEC BALING

Form：Granules | Grade：Injection grade

Properties:

Medium viscosity Medium viscosity

Typical Applications:

MonofilamentSuitable for general injection moldingExtrusion moldingFlame retardant modification and spinning of brownMonofilament etc

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Monofilament \| Suitable for general injection molding \| Extrusion molding \| Flame retardant modification and spinning of brown \| Monofilament \| etc
Properties:	Medium viscosity \| Medium viscosity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Relative viscosity	---	GB/T 1632-93	2.90±0.03	---
density	---	GB 1033-86	1.157	---
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	---	GB/T 1043-93	1.40	%
Shore hardness	---	GB 9341-88	63.8	R
Elongation at Break	---	GB 1040-92	153.4	%
Impact strength of cantilever beam gap	---	IEC (CTI)	22.4	KJ/m
Bending modulus	---	GB 9341-88	2026	Mpa
bending strength	---	GB 9341-88	83.6	Mpa
tensile strength	---	GB 1040-92	66.5	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature			217～223	°C
Hot deformation temperature	HDT		74.1	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	---	GB 1044-70	1.3	---
Surface resistivity		GB 1044-70	5.7×10	Ω
Surface resistivity	Surface resistivity		GB 1044-70	8.0×10	Ω
Volume resistivity		GB 1044-70	7.2×10	Ω
Dielectric loss	Tangent	GB 1044-70	4.3×10
Volume resistivity		GB 1044-70	6.7×10	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top