PI, TP PL500A
0
- Usages:Filmcable sheath
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.33 g/cm³ | |
| Shrinkage rate | 内部方法 | 0.74 % | |
| 内部方法 | 0.85 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D790 | 136 MPa | |
| tensile strength | ASTM D638 | 92.0 MPa | |
| elongation | Break | ASTM D638 | 70 % |
| Flexural modulus | ASTM D790 | 3100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 120 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | 5.5E-05 cm/cm/°C | |
| Heat distortion temperature | ASTM D648 | 235 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 5.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top