TPU ST-3995-80

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.13 g/cm³
melt mass-flow rate		ASTM D1238	49 g/10min
melt mass-flow rate	melt mass-flow rate		ASTM D1238	49 g/10min
density		ASTM D792	1.13 g/cm³

hardness	Test Condition	Test Method	Test Result
Shore hardness	Shore A	ASTM D2240	80
Shore hardness	Shore hardness	Shore A	ASTM D2240	80

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Break	ASTM D638	31.0 MPa
Stretch permanent deformation		ASTM D638	20 %
elongation	Break	ASTM D638	450 %
elongation	elongation	Break	ASTM D638	450 %
tensile strength	Break	ASTM D638	31.0 MPa
Stretch permanent deformation		ASTM D638	20 %

elastomer	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	8.27 MPa
	tensile strength		ASTM D638	13.8 MPa
		tensile strength		ASTM D638	8.27 MPa
		tensile strength	tensile strength		ASTM D638	13.8 MPa
tear strength		ASTM D624	70.0 kN/m
tear strength	tear strength		ASTM D624	70.0 kN/m

Thermal performance	Test Method	Test Result
Continuous use temperature	ASTM D794	-54.0-79.0 °C
melting temperature		150to165 °C
Continuous use temperature	ASTM D794	-54.0-79.0 °C
melting temperature		150to165 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top