
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | 干 | ASTM D-2863 | 26 | % |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 湿 | 2.2 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | 干(湿) | ASTM D-785 | 120(110) | R scale |
| 干(湿) | ASTM D-785 | 85(60) | M Scale | |
| Elongation at Break | 干(湿) | ASTM D-638 | 35(200) | % |
| tensile strength | 干(湿) | ASTM D-638 | 88(67) | Mpa |
| flexural coefficient | 干(湿) | ASTM D-790 | 3.0(1.3) | GPa |
| Impact strength of cantilever beam gap | 干(湿) | ASTM D-256 | 39(108) | J/m |
| bending strength | 干(湿) | ASTM D-790 | 128(59) | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 干 | UL 94 | V-2 | |
| thermal conductivity | 干 | 0.2 | W/(m.K) | |
| Linear coefficient of thermal expansion | 干 | ASTM D-696 | 8 | |
| Hot deformation temperature | 0.46MPa,干 | ASTM D-648 | 240 | °C |
| 1.82MPa,干 | ASTM D-648 | 75 | °C | |
| specific heat | 干 | 1670 | J/(kg.k) | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Wear factor | 湿 | ASTM D-1044 | 6 | |
| Shrinkage rate | 干 | 旭化成方法 | 0.9-1.6 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.