Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| STORAGE STABILITY | | | 210 min |
| STORAGE STABILITY | | | 240 min |
| Thermosetting mixed viscosity | | ASTM D2393 | 23000 cP |
| Thermosetting mixed viscosity | | ASTM D2393 | 12000 cP |
| Thermosetting components | | | 100 |
| Thermosetting components | | | 100 |
| Thermosetting components | | | 100 |
| Thermosetting components | | | 100 |
| Thermosetting components | | | 按重量计算的混合比:10 |
| Thermosetting components | | | 按重量计算的混合比:11 |
| Thermosetting components | | | 按重量计算的混合比:12 |
| Thermosetting components | | | 按重量计算的混合比:8.0 |
| STORAGE STABILITY | | | 30 min |
| STORAGE STABILITY | | | 75 min |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D1475 | 1.64 g/cm³ |
| density | | ASTM D1475 | 1.66 g/cm³ |
| Specific volume | | ASTM D792 | 0.603 cm³/g |
| Specific volume | | ASTM D792 | 0.596 cm³/g |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 90 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CureTime | | | 3.0 hr |
| CureTime | | | 9.0 hr |
| CureTime | | | 24.0 hr |
| CureTime | | | 24.0 hr |
| CureTime | | | 1.5 hr |
| CureTime | | | 2.3 hr |
| CureTime | | | 3.3 hr |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Compression Modulus | | ASTM D695 | 1860 MPa |
| compressive strength | | ASTM D695 | 86.2 MPa |
| compressive strength | | ASTM D695 | 108 MPa |
| Tensile modulus | | ASTM D638 | 14100 MPa |
| Tensile modulus | | ASTM D638 | 49600 MPa |
| tensile strength | | ASTM D638 | 41.4 MPa |
| tensile strength | | ASTM D638 | 33.2 MPa |
| elongation | | ASTM D638 | 0.50 % |
| elongation | | ASTM D638 | 0.54 % |
| Flexural modulus | | ASTM D790 | 9670 MPa |
| bending strength | | ASTM D790 | 52.8 MPa |
| Compression Modulus | | ASTM D695 | 865 MPa |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTM D624 | 24.5 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 57.2 °C |
| Heat distortion temperature | | ASTM D648 | 107 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare