POM TC3010 KOLON KOREA

Form：Granules | Grade：Injection grade

Properties:

Talcum powder filling Talcum powder filling

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Talcum powder filling | Talcum powder filling

Certificates

No Data...

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	3mmt,直径100mm		1.8	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,60%RH	ASTM D-570	0.21	%
melt mass-flow rate		ASTM D-1238	21	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23°C	ASTM D-638	630	Kgf/cm
Elongation at Break	2mmt	ASTM D-732	530	Kgf/cm
Rockwell hardness		ASTM D-785	M84	M Scale
bending strength	23°C	ASTM D-790	1000	Kgf/cm
Impact strength of cantilever beam gap	3.2mmt Stype	ASTM D-1822	50	Kgf.cm/cm
Bending modulus	23°C	ASTM D-790	3.90
elongation	23°C	ASTM D-638	8	%
Impact strength of cantilever beam gap	Notch 3.2mmt	ASTM D-256	4	Kgf.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	18.6kgf/cm	ASTM D-648	140	°C
Combustibility	0.8mmt	UL 94	HB
Linear coefficient of thermal expansion	20°C-80°C	ASTM D-696	8
Hot deformation temperature	4.6kgf/cm	ASTM D-648	160	°C
Melting temperature	10°C/min	DSC Method	165	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
filler content			Low	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D-257	1×10	Ω
Volume resistivity		ASTM D-257	1×10	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top