
PP MAJ'ECO EP287W AD MAJORIS FRANCE
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 25 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2/1 | 2800 | MPa | |
| Bending modulus | ISO 178 | 2400 | MPa | |
| Tensile strain | Break | ISO 527-2/50 | 5.0 | % |
| tensile strength | Break | ISO 527-2/50 | 31.0 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 95.0 | °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 135 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 0.910 | g/cm³ | |
| Shrinkage rate | 2.00mm | Internal Method | 1.0to1.2 | % |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 13 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.