Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.53 g/cm³ |
| Apparent density | | ASTM D1895 | 0.60 g/cm³ |
| Shrinkage rate | | ASTM D6289 | 0.60 % |
| Water absorption rate | Equilibrium | ASTM D570 | 0.40 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-1 |
| UL flame retardant rating | | UL 94 | V-0 |
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 76.0 MPa |
| Tensile modulus | | ASTM D638 | 10300 MPa |
| tensile strength | | ASTM D638 | 55.0 MPa |
| compressive strength | | ASTM D695 | 179 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTM D256 | 20 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 3 |
| Volume resistivity | | ASTM D257 | 1E+12 ohms·cm |
| dielectric strength | | ASTM D149 | 15 kV/mm |
| dielectric strength | | ASTM D149 | 12 kV/mm |
| dielectric constant | | ASTM D150 | 5.00 |
| Dissipation Factor | | ASTM D150 | 0.040 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Elec | | UL 746 | 155 °C |
| Heat distortion temperature | | ASTM D648 | 182 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare