PP REPRO PP RT314 Rondo Plast AB
0
- Properties:Fillertalc filler20%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 15 g/10min | |
| Shrinkage rate | ISO 2577 | 0.90to1.2 % | |
| ISO 2577 | 0.90to1.2 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Hot filament ignition temperature | IEC 60695-2-13 | 750 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 2.0 kJ/m² | |
| ISO 179 | 4.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 1800 MPa | |
| bending strength | ISO 178 | 43.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/B50 | 80.0 °C | |
| Heat distortion temperature | ISO 75-2/A | 57.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top