POM FB-2025 CELANESE USA

Form：Granules | Grade：Injection grade

Properties:

High rigidityLow warpageFiller: Glass beads

Typical Applications:

Vehicle electronicsElectronic appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Vehicle electronics \| Electronic appliances \| Automotive sector
Properties:	High rigidity \| Low warpage \| Filler: Glass beads

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179	2.8	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ISO 527-2/50	60.0	Mpa
Nominal tensile fracture strain		ISO 527-2	4.8	%
Bending modulus	23°C	ISO 178	3500	Mpa
bending strength	23°C	ISO 178	93.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 11357-3	165	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	115	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.59	g/cm³
melt mass-flow rate	190°C/2.16kg	ISO 1133	9.0	g/10min
Shrinkage rate	MD1：3.00mm	Internal Method	1.5	%
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+16	ohms
Volume resistivity		IEC 60093	1E+16	ohms·cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top