ASA+PC Edgetek™ ET3500-5002 BK
0
- Properties:Mechanical properties
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| tensile strength | ISO 527-2/50 | 100 MPa | |
| Tensile strain | ISO 527-2/50 | 2.2 % | |
| Volume resistivity | ASTM D257 | >1.0E+15 ohms·cm | |
| Water absorption rate | ASTM D570 | 0.15 % | |
| Tensile modulus | ISO 527-2/1 | 5900 MPa | |
| UL flame retardant rating | UL 94 | HB | |
| density | ISO 1183 | 1.23 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 17to22 g/10min | |
| Melt volume flow rate | ISO 1133 | 13.0to16.0 cm³/10min | |
| Shrinkage rate | ASTM D955 | 0.10to0.20 % | |
| Charpy Notched Impact Strength | ISO 179 | 8.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179 | 37 kJ/m² | |
| Surface Resistivity | ASTM D257 | >1.0E+14 ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top