Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 7.8 g/10min |
| Content of comonomer | | 内部方法 | 6.5 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 7.8 g/10min |
| melt mass-flow rate | | ISO 1133 | 7.8 g/10min |
| Monomer content | | Internal Method | % |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| Starting temperature of heat sealing | | Internal Method | ℃ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D-638 | 130 MPa |
| Tensile modulus | | ISO 527-2 | 130 MPa |
| tensile strength | | ASTM D-638 | 7.5 MPa |
| tensile strength | | ISO 527-2 | 7.5 MPa |
| tensile strength | | ASTM D-638 | 18 MPa |
| Tensile modulus | | ASTMD638 | 130 Mpa |
| tensile strength | | ASTMD638 | 7.50 Mpa |
| tensile strength | | ASTMD638 | 18.0 Mpa |
| elongation | | ASTMD638 | 590 % |
| tensile strength | | ISO 527-2 | 18 MPa |
| elongation at break | | ASTM D-638 | 590 % |
| elongation at break | | ISO 527-2 | 590 % |
| film | Test Condition | Test Method | Test Result |
|---|
| Initial sealing temperature | | 内部方法 | 90.0 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | Internal Method | ℃ |
| vicat | | ISO 306/A | 90.0 °C |
| melting temperature | | 内部方法 | 100 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices