
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Tensile modulus | ASTM D638 | 8270 | Mpa | |
| Friction coefficient | ASTM D1894 | 0.24 | ||
| tensile strength | ASTM D638 | 117 | Mpa | |
| compressive strength | ASTM D695 | 82.7 | Mpa | |
| Bending modulus | ASTM D790 | 6890 | Mpa | |
| bending strength | ASTM D790 | 179 | Mpa | |
| Elongation at Break | ASTM D638 | 2.5 | % | |
| Impact strength of cantilever beam gap | 3.18 mm | ASTM D256 | 80.1 | J/m |
| Suspended wall beam without notch impact strength | 3.18 mm | ASTM D256 | 534 | J/m |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 66 psi, Unannealed | ASTM D648 | 243 | °C |
| 264 psi,Unannealed | ASTM D648 | 221 | °C | |
| UL flame retardant rating | 1.59 mm | UL 94 | V-0 | |
| heat conduction | ASTM C177 | 0.35 | W/m/K | |
| Linear coefficient of thermal expansion | 平行Flow | ASTM D696 | 0.000049 | cm/cm/℃ |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD(3.18 mm) | ASTM D955 | 0.0040 | cm/cm |
| Water absorption rate | 24hr | ASTM D570 | 0.70 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.