PP Y101H TPC SINGAPORE

Form：Granules | Grade：Injection grade

Properties:

Thermal stabilityHigh mobility

Typical Applications:

Electrical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical components
Properties:	Thermal stability \| High mobility

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
purpose			注塑级
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	15	g/10min
density		ASTM D-792	0.90
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D-747	1420	Mpa
Impact strength of cantilever beam gap		ASTM D-256	2.5	kj/cm
tensile strength	Break	ASTM D-638	34.3	Mpa
elongation	Break	ASTM D-638	650	%
Impact strength of cantilever beam gap		ASTM D256/ISO 179	2.5	kg·cm/cm(J/M)ft·lb/in
Bending modulus		ASTM D790/ISO 178	1420	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature			165	°C
Hot deformation temperature	HDT	ASTM D648/ISO 75	120	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	0.9
melt mass-flow rate		ASTM D1238/ISO 1133	15	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top