PC 3414R-731 SABIC INNOVATIVE SPAIN

Form：Granules | Grade：Injection grade

Properties:

Flame retardantenhanceGlass fiber reinforcedHigh rigidity

Typical Applications:

Fiber grade

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fiber grade
Properties:	Flame retardant \| enhance \| Glass fiber reinforced \| High rigidity

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D1822	67.2	kJ/m²
Dart impact	23°C	ASTM D3029	6.78	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.1mm	UL 94	V-1
UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000Cycles,1000g,CS-17Wheel	ASTM D1044	32.0	mg
bending strength	Yield,50.0mmSpan	ASTM D790	186	Mpa
Bending modulus	50.0mmSpan	ASTM D790	9650	Mpa
elongation	Break	ASTM D638	3.0	%
tensile strength	Break	ASTM D638	125	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	154	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	146	°C
Vicat softening temperature		ASTM D15255	166	°C
Linear coefficient of thermal expansion	MD：-40to95°C	ASTME831	1.6E-05	cm/cm/°C
specific heat		ASTMC351	1050	J/kg/°C
thermal conductivity		ASTMC177	0.22	W/m/K
RTI Str		UL 746	130	°C
RTI Imp		UL 746	130	°C
RTI Elec		UL 746	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/5.0kg	ASTM D1238	13	g/10min
Specific volume		ASTM D792	0.658	cm³/g
Water absorption rate	Equilibrium,23°C	ASTM D570	0.23	%
Water absorption rate	Water absorption rate	24hr	ASTM D570	0.12	%
Shrinkage rate	MD：3.20mm	Internal Method	0.10-0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	60Hz	ASTM D150	1.3E-03
Dissipation factor	Dissipation factor	50Hz	ASTM D150	1.3E-03
Dielectric constant	1MHz	ASTM D150	3.48
	Dielectric constant	60Hz	ASTM D150	3.53
	Dielectric constant	Dielectric constant	50Hz	ASTM D150	3.53
Dielectric strength	3.20mm,inAir	ASTM D149	18	KV/mm
Volume resistivity		ASTM D257	>1.0E+17	ohms·cm
Dissipation factor	1MHz	ASTM D150	6.7E-03
Arc resistance		ASTM D495	PLC7
Compared to the anti leakage trace index	CTI	UL 746	PLC 4
High arc combustion index	HAI	UL 746	PLC 4
High voltage arc tracing rate	HVTR	UL 746	PLC 3
Hot wire ignition	HWI	UL 746	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ASTM D785	119
Rockwell hardness	Rockwell hardness	M-Sale	ASTM D785	93

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top