EHMWPE DeWAL DW 402
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 0.930 g/cm³ | ||
| Water absorption rate | Saturation | 0.010 % | |
| Thickness | 0.0762to2.36 mm |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| CoreID | 7.62 cm | ||
| MaximumRollOD | 356 mm | ||
| Width | 6.35to1220 mm |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D882 | 41.4 MPa |
| elongation | Break | ASTM D882 | 300 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTM D150 | 2.30 | |
| Dissipation Factor | ASTM D150 | 4E-04 | |
| dielectric strength | ASTM D149 | 39 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 95.0 °C | |
| Linear coefficient of thermal expansion | 2E-04 cm/cm/°C | ||
| thermal conductivity | ASTMC177 | 0.063 W/m/K | |
| deformation | 6.0to8.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top