PVC Keysor PVC KC1300
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.33 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 6.2 g/10min | |
| density | ASTMD792 | 1.33 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 6.2 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 78 | ||
| ASTMD2240 | 78 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 2390 MPa | |
| ASTMD638 | 2390 MPa | ||
| tensile strength | Yield | ASTMD638 | 46.2 MPa |
| Flexural modulus | ASTMD790 | 2750 MPa | |
| bending strength | Yield | ASTMD790 | 81.4 MPa |
| tensile strength | Yield | ASTMD638 | 46.2 MPa |
| Flexural modulus | ASTMD790 | 2750 MPa | |
| bending strength | Yield | ASTMD790 | 81.4 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 120 J/m | |
| ASTMD256 | 120 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 71.1 °C | ||
| ASTMD648 | 71.1 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top