
PA66 14G33 BK ASAHIKASEI SUZHOU
47
Form:Granules | Grade:Injection grade
Properties:
Fatigue resistanceHigh rigidityCreep resistancehigh strengthThermal stabilityheat-resisting
Typical Applications:
Electrical applicationsAutomotive ApplicationsGearscomponent
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Electrical applications | Automotive Applications | Gears | component |
| Properties: | Fatigue resistance | High rigidity | Creep resistance | high strength | Thermal stability | heat-resisting |
Certificates
TDS
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Tensile modulus | 23℃ | ISO 527-1 | 9800 | Mpa |
| Tensile stress | Break,23℃ | ISO 527-2 | 208 | Mpa |
| Break,23℃ | ASTM D638 | 210 | Mpa | |
| elongation | Break | ASTM D638 | 3.0 | % |
| Break,23℃ | ISO 527-2 | 4.0 | % | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Density/specific gravity | ASTM D792 | 1.39 | g/cm³ | |
| Shrinkage rate | 垂直 | Internal Method | 0.80 | % |
| Flow | Internal Method | 0.40 | % | |
| Water absorption rate | Equilibrium,23℃,50% RH | ISO 62 | 1.7 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.