Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO 1133 | 9.0 g/10min |
| melt mass-flow rate | | ISO 1133 | 9.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO 2039-2 | 95 |
| other | Test Condition | Test Method | Test Result |
|---|
| characteristic | | | 注塑 高抗冲. 抗静电. 高刚性 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 1450 Mpa |
| tensile strength | | ISO 527-2 | 29.0 Mpa |
| Tensile strain | | ISO 527-2 | 50 % |
| Tensile modulus | | ISO 527-2 | 1450 Mpa |
| Tensile stress | | ISO 527-2 | 29 Mpa |
| Tensile strain | | ISO 527-2 | 50 % |
| Charpy Notched Impact Strength | | ISO 179 | 4.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179 | 10 kJ/m² |
| Rockwell hardness | | ISO 2039-2 | 95 |
| Impact strength of cantilever beam gap | | ASTM D256/ISO 179 | 10 kg·cm/cm(J/M)ft·lb/in |
| elongation at break | | ASTM D638/ISO 527 | 50 % |
| Tensile modulus | | ASTM D638/ISO 527 | 1450 kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D638/ISO 527 | 29 kg/cm²(MPa)[Lb/in²] |
| Rockwell hardness | | ASTM D785 | 95 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179 | 4.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 10 kJ/m² |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 0.91 |
| melt mass-flow rate | | ASTM D1238/ISO 1133 | 9.0 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 105 °C |
| Heat distortion temperature | | ISO 75-2/B | 105 °C |
| Heat distortion temperature | | ASTM D648/ISO 75 | 105 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices