Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.14 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 1.5 g/10min |
| Water absorption rate | | ASTMD570 | 0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 41 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 20 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| FatigueResistance | | ASTMD1052 | 0.1/300 kCycles |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTMD638 | 30.0 MPa |
| elongation | Break | ASTMD638 | 460 % |
| Flexural modulus | | ASTMD790 | 90.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 无断裂 |
| Impact strength of cantilever beam gap | | ASTMD256 | 无断裂 |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTMD624 | 110 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTMD15253 | 155 °C |
| | ASTMD3417 | 200 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare