
PCTG TX1500HF EASTMAN USA
52
Form:Granules | Grade:Injection grade
Properties:
Easy to processheat-resisting
Typical Applications:
Household daily necessitiesElectrical applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Household daily necessities | Electrical applications |
| Properties: | Easy to process | heat-resisting |
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| turbidity | ASTM D1003 | <1.0 | % | |
| transmissivity | Total | ASTM D1003 | 91.0 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break,23°C | ASTM D638 | 210 | % |
| Tensile strain | Yield,23°C | ISO 527-2 | 7.0 | % |
| elongation | Yield,23°C | ASTM D638 | 7.0 | % |
| tensile strength | Break,23°C | ISO 527-2 | 49.0 | Mpa |
| Break,23°C | ASTM D638 | 52.0 | Mpa | |
| Yield,23°C | ISO 527-2 | 44.0 | Mpa | |
| Yield,23°C | ASTM D638 | 43.0 | Mpa | |
| Tensile modulus | 23°C | ISO 527-2 | 1600 | Mpa |
| 23°C | ASTM D638 | 1580 | Mpa | |
| bending strength | Yield,23°C | ASTM D790 | 64.0 | Mpa |
| 23°C | ISO 178 | 60.0 | Mpa | |
| Bending modulus | 23°C | ISO 178 | 1500 | Mpa |
| 23°C | ASTM D790 | 1580 | Mpa | |
| Tensile strain | Break,23°C | ISO 527-2 | 150 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 81.0 | °C |
| 0.45MPa,Unannealed | ASTM D648 | 94.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ASTM D955 | 0.50-0.70 | % |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Sale,23°C | ASTM D785 | 111 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.