TPV 101-87 CELANESE USA

Form：Granules | Grade：Injection grade

Properties:

Aging resistanceHigh impact resistance

Typical Applications:

household electrical appliancesAutomotive ApplicationsElectrical applicationsConsumer product application fieldPipe fittingsdiaphragmHome appliance componentsApplication in the automotive fieldMovable hingeOutdoor applicationsParts under the hood of a carElectrical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	household electrical appliances \| Automotive Applications \| Electrical applications \| Consumer product application field \| Pipe fittings \| diaphragm \| Home appliance components \| Application in the automotive field \| Movable hinge \| Outdoor applications \| Parts under the hood of a car \| Electrical components
Properties:	Aging resistance \| High impact resistance

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.0mm	UL 94	HB
	UL flame retardant rating	1.5mm	UL 94	HB
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
Tensile stress	100%Strain,23°C，横向Flow	ASTMD412	7.10	Mpa
tensile strength	Break,23°C，横向Flow	ASTMD412	15.0	Mpa
elongation	Break,23°C，Across Flow	ASTMD412	580	%
tear strength	23°C3，横向Flow	ASTM D624	52.0	kN/m
tear strength	tear strength	23°C4，横向Flow	ISO 34-1	52	kN/m
Permanent compression deformation	70°C,22hr5	ASTM D395B	36	%
	Permanent compression deformation	125°C,70hr5	ASTM D395B	44	%
		Permanent compression deformation	70°C,22hr6	ISO 815	36	%
		Permanent compression deformation	Permanent compression deformation	125°C,70hr6	ISO 815	44	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTMD746	-54.0	°C
RTI Elec		UL 746	90.0	°C
RTI	1.0mm	UL 746	90.0	°C
	RTI	1.5mm	UL 746	90.0	°C
	RTI	RTI	3.0mm	UL 746	95.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Outdoor applicability		UL 746C	f1
Resistance to cleaning agents		ISO 188	f4
Resistance to cleaning agents	Resistance to cleaning agents		UL 749	f3
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	23°C,2.00mm	ASTM D149	30	KV/mm
Dielectric constant	23°C,1.98mm	ASTMD150	2.60
Compared to the anti leakage trace index	CTI	UL 746	PLC 0
High arc combustion index	HAI	UL 746	PLC 0
High voltage arc tracing rate	HVTR	UL 746	PLC 1
Hot wire ignition	1.0mm	UL 746	PLC 4
	Hot wire ignition	1.5mm	UL 746	PLC 3
	Hot wire ignition	Hot wire ignition	3.0mm	UL 746	PLC 2
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,15Sec,23°C	ISO 868	93
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of ultimate elongation in air	125°C,70hr,在IRM903油中	ASTMD471	-32	%
Volume change	125°C,70hr,在IRM903油中	ASTMD471	48	%
Continuous use temperature	1008hr	自定标准	135	°C
Change rate of tensile strength in air	150°C,168hr	ASTMD573	-15	%
Change rate of ultimate elongation in air	150°C,168hr	ASTMD573	-16	%
Change rate of hardness (Shore) in the air	ShoreA,150°C,168hr	ASTMD573	2.0
Change rate of tensile strength in air	125°C,70hr,在IRM903油中	ASTMD471	-29	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top