Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D-792 | 1.04 |
| processability | Test Condition | Test Method | Test Result |
|---|
| Molding method | | | 挤出注塑 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 4.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D-638 | 23 Mpa |
| bending strength | | ASTM D-790 | 46 Mpa |
| elongation | | ASTM D-638 | 47 % |
| Impact strength of cantilever beam gap | | ASTM D-256 | 110 J/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D-525 | 70 |
| Residual amount of monomer | | | 600 ppm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTM D-1525 | 98 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices