Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.12 g/cm³ |
| Viscosity | | | 380 mPa·s |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | | 80to82 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CriticalExposure | | | 20.0to25.0 mJ/cm² |
| Puncture Strength | | | 150.0 µm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | | 1800 MPa |
| tensile strength | | | 49.0 MPa |
| elongation | Break | | 13to15 % |
| Flexural modulus | | | 2230 MPa |
| bending strength | | | 70.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | | 48to49 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | | 55.0to56.0 °C |
| Heat distortion temperature | | | 49.0to52.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare