Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.29 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 47 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ArizonaWeather | | | 4-5AATCC |
| color stability | | ASTM D573 | 5AATCC |
| FloridaWeather | | | 4-5AATCC |
| H | | | 5AATCC |
| Paint Staining | | | NoStain |
| RoadAsphaltStainResistance-deltaE | | | 0.870 |
| xenon-arc weathering | | SAEJ1885 | 4-5AATCC |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527-2/5A | 17.4 MPa |
| Tensile strain | Break | ISO 527-2/5A | 230 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ISO 34-1 | 100 kN/m |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | ASTM D573 | 7.8 % |
| elongation at break | | ASTM D573 | 0.80 % |
| Changes in air quality | | ASTM D573 | 2.7 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Low temperature bendability | | | Pass |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare