Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.32 g/cm³ |
| Shrinkage rate | | | 1.1 % |
| Water absorption rate | | ISO 62 | 2.0 % |
| density | | ISO1183 | 1.32 g/cm³ |
| Shrinkage rate | | | 1.1 % |
| Shrinkage rate | | | 0.30 % |
| Water absorption rate | | ISO62 | 2.0 % |
| Moisture content | | ISO960 | <2000 ppm |
| other | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Burning wire flammability index | | IEC 60695-2-12 | 650 °C |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| Burning wire flammability index | | IEC60695-2-12 | 650 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2/5 | 8500 MPa |
| Tensile stress | | ISO 527-2/5 | 170.0 MPa |
| Tensile strain | | ISO 527-2/5 | 3.0 % |
| Impact strength of cantilever beam gap | | ISO 180/1A | 7.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180/1A | 8.0 kJ/m² |
| | ISO 180/1U | 60 kJ/m² |
| | ISO 180/1U | 65 kJ/m² |
| Tensile modulus | | ISO527-2/5 | 8500 MPa |
| Tensile stress | | ISO527-2/5 | 170 MPa |
| Tensile strain | | ISO527-2/5 | 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| | ISO180/1U | 65 kJ/m² |
| | ISO180/1U | 60 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 7.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 8.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | 1E+15 ohms·cm |
| CTI | | IEC 60112 | 500 V |
| Surface Resistivity | | IEC 60093 | 1E+13 ohms |
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| CTI | | IEC60112 | 500 V |
| Surface Resistivity | | IEC60093 | 1E+13 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75-2/B | 260 °C |
| | ISO 75-2/A | 255 °C |
| vicat | | ISO 306/B | 255 °C |
| melting temperature | | ISO 11357 | 262 °C |
| | ISO75-2/B | 260 °C |
| | ISO75-2/A | 255 °C |
| vicat | | ISO306/B | 255 °C |
| melting temperature | | ISO11357 | 262 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare