TPEE 5555HS DUPONT USA

Form：Granules | Grade：Injection grade

Properties:

UV resistanceThermal stability

Typical Applications:

Automotive ApplicationsElectrical applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Electrical applications
Properties:	UV resistance \| Thermal stability

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
bending strength		ASTM D-1052	>1×105
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr	ASTM D-570	0.7	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Initial tear strength		ASTM D-1004	158	kN/m
Shore hardness		ASTM D-2240	55
Impact strength of cantilever beam gap	23℃	ASTM D-256	不破裂	J/m
tensile strength	10%伸长	ASTM D-638	10.3	Mpa
tensile strength	tensile strength	5%伸长	ASTM D-638	6.9	Mpa
Rubbing modulus	23℃	ASTM D-790	207	Mpa
Bending modulus		ASTM D790/ISO 178	207	kg/cm²(MPa)[Lb/in²]
Rockwell hardness		ASTM D785	55
elongation		ASTM D412/ISO 527	10.3	℃（℉）
tensile strength		ASTM D412/ISO 527	40	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D412/ISO 527	6.9	%
	Elongation at Break		ASTM D412/ISO 527	500	%
		Elongation at Break		ASTM D-638	500	%
		Elongation at Break	Elongation at Break	Break	ASTM D-638	40	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D1525/ISO R306	180	℃（℉）
Melting temperature			203	℃（℉）
Melting temperature	Melting temperature		ASTM D-3418	203	°C
Hot deformation temperature	@0.18Mpa	ASTM D-648	49	°C
Vicat softening temperature		ASTM D-1525	180	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	H 18轮	ASTM D-1044	112	mg/1000rev
melt mass-flow rate		ASTM D-1238	8.5	g/10min
Hot deformation temperature	@0.5Mpa	ASTM D-648	90	°C
Taber abraser	CS-17轮	ASTM D-1044	-	mg/1000rev
density		ASTM D955	1.2	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top