PES E1010G9-BK10112
147
- Properties:Filler: Glass fiber reinf45% filler by weight45% filler by weight
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.73 g/cm³ | |
| Apparent density | 0.70to0.80 g/cm³ | ||
| Melt volume flow rate | ISO 1133 | 35.0 cm3/10min | |
| Shrinkage rate | ISO 294-4 | 0.70 % | |
| ISO 294-4 | 0.40 % | ||
| Water absorption rate | ISO 62 | 0.65 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 15500 Mpa | |
| tensile strength | ISO 527-2 | 145 Mpa | |
| Tensile strain | ISO 527-2 | 1.3 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 8.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 40 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 216 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.3E-05 cm/cm/°C | |
| DIN 53752 | 1.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top