Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
Shrinkage rate | | GB/T 15585-1995 | 0.0025 mm/mm |
Basic performance | Test Condition | Test Method | Test Result |
---|
density | | GB/T 1033-1986 | 1.55 g/cm³ |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
compressive strength | | GB/T 1041-1992 | 140 Mpa |
Rockwell hardness | | GB/T 9342-1988 | 100 hr |
elongation | | GB/T 1040-1992 | 1.70 % |
Flexural modulus | | GB/T 1042-1992 | 1.1×104 Mpa |
bending strength | | GB/T 1042-1992 | 180 Mpa |
Impact strength of cantilever beam gap | | GB/T 1843-1996 | 11.5 kJ/m² |
tensile strength | | GB/T 1040-1992 | 142 Mpa |
elongation at break | | ASTM D638/ISO 527 | 1.7 % |
tensile strength | | ASTM D638/ISO 527 | 142 kg/cm²(MPa)[Lb/in²] |
Rockwell hardness | | ASTM D785 | 100 |
Flexural modulus | | ASTM D790/ISO 178 | 1.1*100000 kg/cm²(MPa)[Lb/in²] |
bending strength | | ASTM D790/ISO 178 | 180 kg/cm²(MPa)[Lb/in²] |
Electrical performance | Test Condition | Test Method | Test Result |
---|
dielectric constant | | GB/T 1409-1988 | 4 |
electric strength | | GB/T 1408.1-1999 | 18.56 KV/mm |
Surface Resistivity | | GB/T 1410-1989 | 2.3×1015 Ω |
Volume resistivity | | GB/T 1410-1989 | 1.0×1015 Ω.m |
Physical properties | Test Condition | Test Method | Test Result |
---|
density | | ASTM D792/ISO 1183 | 1.55 |
Thermal performance | Test Condition | Test Method | Test Result |
---|
melting point | | GB/T 4608-1984 | 282 °C |
Heat distortion temperature | | GB/T 1634-1979(1989) | 267 °C |
combustibility | | GB/T 2408-1996 | FV-0 级 |
melting point | | | 282 ℃(℉) |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.