
PA66 U4800 INVISTA USA
43
Form:Granules | Grade:Injection grade
Properties:
Good processabilityPhosphorus contentLow (to none)thermal stabilityBromine freeFlame retardancy
Product Description
Certificates(0)
Datasheet
Alternative Model(1)
Product Description
| Properties: | Good processability | Phosphorus content | Low (to none) | thermal stability | Bromine free | Flame retardancy |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3900 | Mpa | |
| tensile strength | Break | ISO 527 | 73.0 | Mpa |
| Tensile strain | Break | ISO 527 | 13 | % |
| bending strength | ISO 178 | 105 | pa | |
| Charpy Notched Impact Strength | 23℃ | ISO 179 | 2.8 | kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 527-2/A | 85.0 | |
| Melting temperature | ISO 11357-3 | 263 | °C | |
| UL flame retardant rating | 0.400 mm | V-0 | ||
| Burning wire flammability index | 0.400 mm | IEC 60695-2-12 | 960 | °C |
| Hot filament ignition temperature | 0.400 mm | IEC 60695-2-13 | 990 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | TD : 2.00 mm | ISO 294-4 | 1.3-1.6 | % |
| MD : 2.00 mm | % | |||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Compared to the anti leakage trace index | 3.00 mm | UL 746 | PLC 0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.