AS(SAN) KIBISAN® PN-106L150
804
- Properties:Chemical resistance
- Usages:Automotive Interior PartsToyArchitectural ApplicationsIndustrial applicationsMonitor
- Certificates:MSDS
Compare
View PricesTechnical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| notes | 加工指南：资料仅供参考.实际加工条件将依射出机之型式.模具之构造及成型性而调整。预热干燥2-3hrs：80-85℃；模温：40-60℃；射出缸温：180-230℃；射出压力：50-70kg/cm2。 | ||
| Color | 透明 | ||
| purpose | 蓄电池外壳.打火机外壳及要求较高强度之透明物体。 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTM D638/ISO 527 | 800(11350) % | |
| Rockwell hardness | ASTM D785 | 85 | |
| Flexural modulus | ASTM D790/ISO 178 | 3.9(5.5) kg/cm²(MPa)[Lb/in²] |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.06 kg·cm/cm(J/M)ft·lb/in |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648/ISO 75 | 90 ℃（℉） | |
| ASTM D648/ISO 75 | 88 ℃（℉） | ||
| melting temperature | 95 ℃（℉） | ||
| vicat | ASTM D1525/ISO R306 | 128 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top