PC 4610-10 STYRON TAIWAN

Form：Granules | Grade：Injection grade

Properties:

transparentMiddle flow Medium liquiditytransparent Medium liquiditytransparent

Supplier(1)

Product Description

Certificates(0)

Datasheet

Alternative Model(1)

Product Description

Properties:

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Glow wire combustion index (GWFI)	2.0mm	IEC 695-2-1	960	°C
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300℃/1.2kg	ASTM D-1238	10	g/10min
density		ASTM D-792	1200	kg/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ASTM D-790	100	Mpa
Tensile modulus		ASTM D-638	2240	Mpa
tensile strength	Yield	ASTM D-638	61	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	900	J/m
tensile strength	Break	ASTM D-638	66	Mpa
Suspended wall beam without notch impact strength	23℃	ASTM D-256	未破裂
elongation at yield		ASTM D-638	6	%
Bending modulus		ASTM D-790	2400	Mpa
elongation	Break	ASTM D-638	120	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	Unannealed@1.82MPa	ASTM D-648	127	°C
	Hot deformation temperature	Annealed@1.82MPa	ASTM D-648	140	°C
	Hot deformation temperature	Hot deformation temperature	Annealed@0.45MPa	ASTM D-648	144	°C
Shrinkage rate	50℃/hr，50n重	ASTM D-1525	154	°C
Ball indentation temperature		IEC 598-1	＞125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	V-2
UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	V-0
Shrinkage rate		ASTM D-955	0.005-0.007	mm/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top