Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D-792 | 1.13 g/cm |
| processability | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D-755 | 0.3-0.6 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 10.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D-256 | 10 kg·cm/cm |
| tensile strength | | ASTM D-638 | 250 kg/cm |
| Rockwell hardness | | ASTM D-785 | 65 L |
| elongation at break | | ASTM D-638 | 80 % |
| Flexural modulus | | ASTM D-790 | 23000 kg/cm |
| bending strength | | ASTM D-790 | 430 kg/cm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D-257 | 10 Ω·cm |
| dielectric strength | | ASTM D-149 | 450↑ V/mil |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-2 |
| Heat distortion temperature | | ASTM D-648 | 80 ℃ |
| vicat | | ASTM D-1525 | 96 ℃ |
| UL flame retardant rating | | UL 94 | V-2 |
| Heat distortion temperature | | ASTM D-648 | 90 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare