Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
Shore hardness | | ISO 2039/1 | 90 Mpa |
Basic performance | Test Condition | Test Method | Test Result |
---|
density | | ISO 1183 | 1.09 g/cm |
Water absorption rate | | DIN 53495 | 3.50 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile modulus | | ISO 527 | 2100 Mpa |
bending strength | | ISO 178 | 80 Mpa |
Flexural modulus | | ISO 178 | 2000 Mpa |
Charpy Notched Impact Strength | | ISO 179/2C | 30 KJ/m |
Impact strength of cantilever beam gap | | ISO 180/1A | 30 KJ/m |
Impact strength of cantilever beam gap | | ISO 180/1A | 15 KJ/m |
tensile strength | | ISO 527 | 55 Mpa |
tensile strength | | ISO 527 | 55 Mpa |
elongation | | ISO 527 | 7.5 % |
elongation | | ISO 527 | 60 % |
Other performance | Test Condition | Test Method | Test Result |
---|
Limiting Oxygen Index | | ISO 4589 | 21 % |
Electrical performance | Test Condition | Test Method | Test Result |
---|
dielectric strength | | IEC 243 | 20.0 KV/mm |
Dissipation Factor | | IEC 250 | 0.0720 |
Dissipation Factor | | IEC 250 | 0.0240 |
Thermal performance | Test Condition | Test Method | Test Result |
---|
thermal conductivity | | DIN 52612 | 0.23 W/m℃ |
Linear coefficient of thermal expansion | | DIN 53752 | 9E-05 1/℃ |
Heat distortion temperature | | ISO 306 | 245 °C |
Heat distortion temperature | | ISO 306 | 190 °C |
Heat distortion temperature | | ISO 306 | 195 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.