
PS Purgex™ 602 Plus Neutrex, Inc.
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23℃ | J/m | 0.044to0.076 | |
| Impact strength of cantilever beam gap | 23℃ | J/m | 0.007to0.022 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23℃ | 3317.24to8482.76 | Mpa | |
| bending strength | 23℃ | 49.66to127.59 | Mpa | |
| tensile strength | 23℃ | 11.03to82.76 | Mpa | |
| Tensile modulus | 23℃ | 2965.52to11724.14 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 81to107 | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | 1.15to1.30 | |||
| Shrinkage rate | MD:23℃ | mm/mm | 0.024-63.5E-3 | |
| Water absorption rate | 23℃,24hr | % | 0.049to0.10 | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 23℃ | ohms·cm | 1.0E+11到1.0E+16 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.