Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.72 g/cm³ |
| Shrinkage rate | | | 6.0 |
| Shrinkage rate | | | 0.10to0.40 % |
| dimensional stability | | | <0.010 % |
| Water absorption rate | | | 0.30 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Conductivity of water extract | | | 30.0 µS/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | | 41.4to68.9 MPa |
| bending strength | | | 89.6to117 MPa |
| compressive strength | | | 165to207 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | | 160to320 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | | 180 sec |
| dielectric strength | | | 62000 V |
| dielectric strength | | | 60000 V |
| Surface Resistivity | | | >1.0E+16 ohms |
| Surface Resistivity | | | 5E+10 ohms |
| Volume resistivity | | | >1.0E+16 ohms·cm |
| Volume resistivity | | | 5E+10 ohms·cm |
| dielectric strength | | | 16 kV/mm |
| dielectric strength | | | 14 kV/mm |
| dielectric constant | | | 4.00 |
| dielectric constant | | | 4.20 |
| dielectric constant | | | 3.90 |
| dielectric constant | | | 4.10 |
| Dissipation Factor | | | 6E-03 |
| Dissipation Factor | | | 9E-03 |
| Dissipation Factor | | | 0.013 |
| Dissipation Factor | | | 0.015 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | | 260 °C |
| Linear coefficient of thermal expansion | | | 2.4E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare