PC TRISTAR® PC-10FRN PTS USA
12
- Properties:Flame retardantUV resistance
- Usages:Communication equipmentElectronic fieldElectrical field
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL -94 | V-0 1.50mm | |
| UL -94 | 5VA 2.50mm | ||
| UL -94 | 5VA 3.00mm | ||
| Extreme Oxygen Index | ASTM2863 | 37.6 % | |
| Ignition temperature of heating wire | IEC 60695-2-12 | 775 °C | |
| Relative temperature of heating wire | IEC 60695-2-13 | 960 °C |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 3.17mm,Yield,23°C | ASTM D638 | 62.1 Mpa |
| Elongation at Break | 3.17mm,23°C | ASTM D638 | 75 % |
| bending strength | 3.17mm,Yield,23°C | ASTM D790 | 89.6 Mpa |
| Bending modulus | 3.17mm,23°C | ASTM D790 | 2210 Mpa |
| 悬壁梁Notched冲击强度 | ASTM D256 | 587 J/m | |
| 拉伸冲击强度 | ASTM D1822 | 443 kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 0.45MPaUnannealed | ASTM D648 | 135 °C |
| 线膨胀系数 | ASTME831-06 | 7.02E-05 cm/cm/°C | |
| 线膨胀系数 | ASTME831-06 | 6.84E-05 cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | (23°C,24hr) | ASTM D570 | 0.18 % |
| melt mass-flow rate | 300℃/1.20Kg | ASTM D1238 | 15 g/10min |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dissipation factor | 耐电弧性 | ASTM D495 | 60-120 S |
| 相对漏电起痕指数 | ASTM D3638 | 250-400 V |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 120 R |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.